Send E-mail
View Mobile No.
KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)
KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)
Andheri East, Mumbai, Maharashtra
Send E-mail
View Mobile No.
Our Products

Vortex Tubes Stainless Steel - Frigid-XYes! I am interested

Available in Three sizes with a wide range of cooling capacity and temperature range.

Box CoolerYes! I am interested
The Frigid-X Box Cooler is used for cooling small enclosures for laboratory use, environmental chambers and any application where an enclosure need scooling (Note: Not approved for electrical and electronic control panels but may be used if approvals not required). This low cost system utilizes a stainless steel vortex tube with an adjustable hot end to control the temperature produced in the enclosure. In the package are all the necessary items to attach the vortex tube along with a separate venting unit to exhaust the hot air being displaced inside the enclosure. An optional hose distribution kit is available to distribute the cold air inside for larger enclosures.Also available is an optional solenoid and thermostat for on-off control.


• No moving parts
• Maintenance Free Operation
• Compact & Easy to Install
• Cooling Capacities to 2900 BTU/hr.
• No CFC's or HCFC's
• Stainless Steel Construction
• No Electricity
• Adjustable Cold Temperatures
Air NozzleYes! I am interested
Air Nozzles – Is made adjustable. The superior design of the adjustable set screw is made to adjust the nozzles within its weakest and strongest ranges.

Air Jets NozzlesYes! I am interested
Product Overview

Air Jets are larger than nozzles and used when a wider area needs to be hit with the amplified air. They are significantly more efficient than nozzles although often use as much compressed air. Their best use is to replace pairs of nozzles that are used for part ejection or for blow-off applications that require greater force than that provided by air knives or air movers. Nozzles are for point use while air jets can fan out somewhat for better continuous blow-off when a row of them are made. Nex Flow™ air jets are all made adjustable with a lock ring to assure the security of any gap setting. They have a female 1/8" NPT and made lightweight with anodized aluminum.

Air Jet Selection Guide:

If you need an air jet selection guide, simply contact one of our technical support personnel at Nex Flow™ or at our regional sales and engineering offices worldwide.

High Velocity Air Jet and Adjustable Air Jet:

The Nex Flow™ High Force Air Jet is also a High Velocity Air Jet. All the air jets are adjustable. With an Adjustable Air Jet the flow and force can be set and "locked" in place with the lock ring for your particular application.

Cabinet Panel CoolerYes! I am interested
Silent X-Stream™ Cabinet Enclosure Cooler / Cooling- Frigid-X™ series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Utilizing a hot and cold end muffling kit the unit is made extra quite to under 64 dBA depending on capacity. The hot end muffler also acts a “heat guard” – you can actually wrap your hand around it without feeling much heat. The hot air is exhausted safely underneath the hot end muffler.

Silent X-Stream™ Cabinet Enclosure Cooler - Frigid-X™ series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.

There are Three (3) Types of Panel Coolers to choose from:

Tool Cooling SystemYes! I am interested

All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-XT Constantly Quieter Than Competition!

Frigid-X™ Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.

Produces cold air at approximately 50º F (28º C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.

Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.

Tool Cooling System - Frigid-X™ - Advantages:

Mist Tool Cooling SystemYes! I am interested
Mist Tool Coolers : No electricity required - simplicity in design, Low Cost, Reduces coolant / lubricant cost by using less fluid, Improves safety with less mist, No moving parts except for an adjusting screw for the fluid, Small and lightweight - portable, Maintenance free operation. Mist Tool Cooling System Frigid-X™ Sub Zero Vortex™ is efficient and can improve dry machining operations. Mist Coolers assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending life. The Nex Flow™ Frigid-X™ SUB ZERO VORTEX™ Cooling Mist System is a unique patent pending mist unit designed to improve machining operations requiring cooling and/or lubrication when dry machining cannot alone be used. Unlike mist systems that supply liquid which is not cooled, or more costly system that cool the liquid, the simple design of the Vortex™ Cooling Mist System, supplies and cools the liquid to as low as 40°F (5°C) using a small vortex tube without any additional pumping system. The result is a low cost and essentially maintenance free system that supplies cold liquid reducing the mist volume by as much as Sub Zero 20%.
Hand Comfort Button Air GunsYes! I am interested
Welcome to

KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)

  • Nature of BusinessManufacturer
  • Total Number of EmployeesUpto 10 People
  • Year of Establishment1991
  • Legal Status of FirmPartnership Firm
  • GST No.27AAAFK1929J1ZB
Nex Flow Air Products Corp. was founded in the year 2007 as a prominent name responsible for manufacturing, supplying and exporting Compressed Air Products. These products are offered following & maintaining industry laid parameters and thereby, stand forth in the category of incomparable range. Under our product gamut, we have assorted Industrial Coolers, Air Nozzles and Cabinet Panel Coolers.These products are used to cater to the diversified industrial needs and have gained immense fame as being capable of offering incomparable performance along with reduced maintenance costs.

We have been able to make our name known in the specified stream and to meet our customers’ expectations, backed by sound infrastructural facility & team of competent professionals. In our profound business, we are availed with world-class infrastructural facility equipped with latest range of machinery & tools. We have an in-house team of experienced professionals, responsible for accomplishing manufacturing and other tasks in an efficient way. Today, our offered range of compressed air products is exported to Pakistan, Bangladesh, Sri Lanka, Nepal and Bhutan and we have become a known all over the globe.


KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)



Send SMS
Ashish Shah  (Partner)
KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)
No. 68- A, New Empire Industrial Estate, Kondivita Road, Andheri East, Mumbai - 400059, Maharashtra, India
Share Us:
Send E-mail